Focal Kanta N2 Pair
Sold as: Pair — two speakers.
Kanta N°2 combines Flax drivers, a beryllium tweeter and a sculpted cabinet in a three-way floorstanding design. It is an inviting choice for a music-led living room where the speaker's design matters as much as its engineering.
- Designed for the job: 3 way bass-reflex floorstanding loudspeaker.
- Focal driver engineering: Flax.
AudioGuru — Authorised Focal Seller
India order enquiries · Pune showroom advice
Did you like this product? Add to favorites now and follow the product.
- GST invoice
Provided with your purchase
- System matching
Advice for your equipment and room
- Project planning
Pune, Maharashtra & India
- Purchase clarity
Confirm delivery and model warranty
AUDIOGURU · PUNE & INDIA
Make it part of the right system.
Tell us about your room, existing equipment and budget. Our Pune team can help you check compatibility, plan installation and confirm availability before you order.
Description
Three-wayPassive floorstanding
PairTwo speakers
40–300 WCheck load compatibility
Who is Kanta N2 for?
Kanta N2 is a passive floorstanding speaker for a stereo system built around a separate amplifier. Consider it when you want a full-size speaker pair and can give placement, listening distance and amplifier matching proper attention. It is not a Bluetooth speaker or a complete streaming system by itself.
Reasons to shortlist: a three-way design, Flax drivers and an IAL3 beryllium tweeter in a distinctive cabinet. Trade-offs: substantial floor space, a separate amplifier and careful positioning. Compare the actual room and listening level before treating a larger speaker as an automatic upgrade.
Match the system to your room
Start with room dimensions, listening distance, typical volume and the amplifier you already own. Focal specifies 8 ohms nominal impedance but a 3.1-ohm minimum, so amplifier suitability cannot be decided from the nominal figure alone. Its recommended amplifier range is 40–300 W; this is guidance rather than a promise that every amplifier in that range is equally suitable.
No bookshelf stand is needed for this floorstanding model. Plan a stable floor position and appropriate protection for the floor finish. Keep access to the speaker terminals and allow practical space for repositioning. Final placement should be checked by listening in the room rather than copied from a showroom photograph.
For a Pune or India setup enquiry, send the room size, amplifier model and intended use to AudioGuru. Delivery and supplied finish depend on order confirmation and product availability.
Kanta N2 or the next model up?
Compare the Kanta N3 when the room and placement space justify a larger cabinet. Its two 8-inch woofers and 46 kg weight per speaker contrast with Kanta N2’s two 6.5-inch woofers and 35 kg weight. A larger model is not automatically the better fit for a restricted room.
| Specification | Kanta N2 | Kanta N3 |
|---|---|---|
| Bass drivers | Two 6.5-inch Flax woofers | Two 8-inch Flax woofers |
| Frequency response, ±3 dB | 35 Hz–40 kHz | 33 Hz–40 kHz |
| Recommended amplifier range | 40–300 W | 40–400 W |
| Minimum impedance | 3.1 ohms | 3 ohms |
| Weight per speaker | 35 kg | 46 kg |
For a standmount alternative, compare the Kanta N1 with suitable stands and room placement included in the decision. Confirm each model’s India quotation and supplied finish separately.
Comparison source: Focal Kanta N3 specifications, checked 2 November 2026.
Technical reference
| Type | Three-way bass-reflex floorstanding speaker |
|---|---|
| Sensitivity | 91 dB at 2.83 V / 1 m |
| Frequency response | 35 Hz–40 kHz, ±3 dB |
| Low-frequency point | 29 Hz, −6 dB |
| Nominal / minimum impedance | 8 / 3.1 ohms |
| Recommended amplifier power | 40–300 W |
| Dimensions, H × W × D | 1,118 × 321 × 477 mm |
| Net weight with grille | 35 kg per speaker |
| Membrane | Flax |
| Tweeter | 27 mm ‘IAL3’ pure Beryllium inverted dome tweeter |
| Woofer | 2x 6.5" (16.5cm) Flax woofer with NIC motor |
| Grilles | Magnetic grille |
| Crossover frequencies | 260Hz – 2,700Hz |
| Packaging dimensions | 1,260 x 420 x 690mm |
| Midrange / mid-bass driver | 6.5" (16.5cm) Flax midrange drivers with TMD suspension and magnet |
Checked 2 November 2026 against Focal’s Kanta N2 page and technical sheet. Metric dimensions follow the technical sheet; inconsistent inch conversions on the web page are omitted.
Frequently asked questions
What is the Focal Kanta N2 price in India?
This listing currently has no confirmed numeric price for its eight finish options, so request a quotation for the exact pair and finish you want. A price from another country, a different Kanta model or an old promotion would not establish the current AudioGuru selling price.
Keep the selected finish in your enquiry. Confirm the quotation before making a purchase decision. Request a confirmed quote.
Which amplifier should I use with Kanta N2?
Choose an amplifier that is suitable for the speaker’s impedance behaviour and your listening level, not just a matching wattage number. Focal recommends 40–300 W, while the minimum impedance is 3.1 ohms; check the amplifier manufacturer’s load guidance and leave useful headroom for your room.
Share the exact amplifier model before replacing it. A specific pairing needs a separate compatibility check. Discuss amplifier matching.
Is Kanta N2 too large for my room?
Room fit depends on usable placement space, listening distance and bass behaviour, not floor area alone. Measure where the pair can stand, including walking space and cable access, before deciding; a larger room may still have an awkward layout, while furniture and openings can change the acoustic result.
Do not treat a manufacturer room-size suggestion as a guarantee. Start with your floor plan and intended listening position. Plan speaker placement.
Can I put Kanta N2 close to the wall?
Allow room to experiment rather than planning to press these speakers tightly against a wall from the outset. Their front and rear ports make the nearby boundaries relevant, and the best position depends on your room; listen for bass balance and clarity while adjusting placement in small steps.
Follow Focal’s installation guidance for the final arrangement. Avoid a universal distance promise without checking the room. Discuss your layout.
Does Kanta N2 need a subwoofer?
A subwoofer is an optional system decision, not a requirement to make this passive speaker work. Decide from the content you play, desired bass extension and room behaviour; music listening and film effects can lead to different priorities, and adding a subwoofer also requires careful level and placement adjustment.
Evaluate the speaker pair in its intended position first. A subwoofer is a separate item unless a quotation explicitly includes one. Discuss bass requirements.
Can I use Kanta N2 with a home-theatre receiver?
It can form part of a system driven by an appropriate amplifier or receiver, but the receiver’s ability to handle the load must be checked for the planned listening level. Do not assume its headline stereo wattage describes performance when several channels are operating at once in a cinema system.
Provide the receiver model and channel layout. Verify any external-amplifier connection before buying additional equipment. Check receiver matching.
Do Kanta N2 speakers need stands?
Kanta N2 is a floorstanding model, so a bookshelf-speaker stand is not the appropriate accessory to add beneath it. Instead, plan a stable floor position, protect the floor surface and follow the manufacturer’s fitting instructions for the supplied support hardware before adjusting the final listening arrangement.
Check the supplied parts against the actual package. Do not infer optional accessories from lifestyle images. Confirm setup requirements.
Are all pictured Kanta N2 finishes available?
The gallery and finish selector show product options, but neither confirms that a particular finish can currently be supplied in India. Select the finish you want and ask for confirmation before ordering; photographs document appearance and must not be treated as a live inventory or delivery promise.
A pictured finish is not a delivery commitment. A quotation should name the actual supplied finish. Confirm your finish.
Discuss your setup with AudioGuru
Tell our Pune team your room dimensions, amplifier model and preferred finish.
Additional information
| Finishes | Black high gloss, Black High Gloss / Grey Matte, Black Lacquer / Walnut HG, Carrara White, Dark Grey Mat / Walnut Mat, Ivory Mat / Walnut Mat, Walnut High Gloss / Taupe Matte, White High Gloss / Carrara White Matte |
|---|---|
| Manufacturer | Focal |
| Product Type | Floorstanding Speakers |
Customer experiences at our Pune showroom
Feedback from Google about the showroom and team.
Focal Kanta N2 Pair
Copyright 2026 © audioguru.in All right reserved. Powered by All Home Living LLP.
Reviews
There are no reviews yet.